CA-M300 / CT-M300 Firmware
Current Version: V1.09
Last Updated:
• 27 April 2012 (Front Panel Software)
• 2 April 2010 (Heatsink Software)
Update BOTH software components
The CA-M300 & CT-M300 amplifiers have 2 internal software components: the Front Panel (FP) Software and the Heatsink (HS) software. Both must be updated. Make sure to update the Front Panel Software FIRST, prior to updating the Heatsink Software.
Downloads
|
How to check the currently installed Firmware
The unit must be connected to a Classe system using CAN-Bus. On a unit with a TFT screen press MENU/STATUS/MORE to view a list of CAN-Bus devices in the system. Select the amplifier and press SELECT/STATUS to view the current version. If the amplifier does not show up on the CAN-Bus list it should be updated.
Installation Program
This Firmware update must be transferred from a local Windows PC to the unit using the “Classé Amploader 3.5” utility. The Amplifier Downloader utility is a small standalone application that can run from your computer Desktop or the Program Files folder. It is included in the ZIP archive. |
